Quality inspections are essential when manufacturing products in any country, Mexico included. There are several quality inspection companies in Mexico that offer services such as pre-shipment inspections, supplier audits, and production management solutions.
In this guide, we list several Mexican quality inspection companies covering products ranging from textiles and leather goods to electronics.
Most of the companies listed below are fully based in Mexico, while some are headquartered overseas but have operations in Mexico as well.
Supplier Overview
Need help finding suppliers for your product?
- We can help you source suppliers in the following areas:
- 1. US & Mexico
- 2. European Union
- 3. Turkey
AMREPMexico
AMREPMexico began operations in Tijuana and Guadalajara in 1994 to provide quality and supplier management solutions to companies that outsourced production to Mexico.
The company partnered with Texas Instruments and Motorola, established its supplier quality assurance programs, and managed its Mexican suppliers.
AMREPMexico’s other clients include but are not limited to, SONY, Bombardier, Qualcomm, Hewlett Packard, and Lockheed Martin. Some of AMREPMexico’s clients are also investor-funded Silicon Valley companies with production operations in Mexico.
Covered Product Categories
- Electronics
- Automotive products
- Aerospace products
- Medical devices
Services
- Quality inspections
- Supplier audits
- Supplier quality engineering
- Production management solutions
- Supplier data analytics
Location: Guadalajara, Jalisco, Mexico
TROPPUS
TROPPUS started to provide inspection services in H. Matamoros, and Tamaulipas in 2012, under the name QSG de Mexico. After 12 years of expansion and acquiring an ISO 9001 certification, TROPPUSupport was founded to provide personalized support to clients. In 2021, the company shortened its name to TROPPUS.
Today, TROPPUS provides quality control services in multiple locations throughout Mexico, especially for buyers based in the United States.
The company has over 3,700 employees and served over 1,600 clients, including Autoliv, Cequent, and Kern-Liebers Mexico.
Covered Product Categories
- Textiles
- Electronics
- Automotive parts
- Metalworking
Services
- Quality inspections
- Quality controls
- Quality liaisons
- Logistics controls
- Industrial reworks
Location: Venustiano Carranza #16 Col. Aurora, Matamoros, Tamaulipas, C.P. 87370, Mexico
Mexico Footwear Agency
Mexico Footwear Agency is located in one of the largest footwear clusters in Leon, Mexico. The company aids its clients in locating footwear manufacturers, investigates those factories to confirm their standards of quality, and performs quality control services. It also helps clients to prepare export and shipping paperwork and conducts negotiations for shoe manufacturers in Mexico.
The company’s production inspection service uses the Shoe and Allied Trade Research Association’s (SATRA)’s quality control system, and its inspectors are certified by both the Guanajuato State government and SATRA. Its pre-shipment inspection service helps ensure the correctness of the product’s final details before shipment.
Covered Product Categories
- Footwear
- Leather goods
Services
- Production inspections
- Pre-shipment inspections
Location: Leon, Guanajuato, Mexico.
Specialized Inspection Services
Specialized Inspection Services (SIS) was founded in 2015 in Mexico, and provides engineering, production, and quality services, mainly for the metal mechanic industry. The company provides services such as third-party inspections, shop surveys and audits, non-destructive testing inspections, and packing and shipping inspections.
Its inspectors and engineers have extensive experience in quality and production services and manage complex, multi-site inspections in Mexico’s industrial cities. The company also claims the ability to handle international standards and specifications, as well as respond quickly to customers’ urgent situations per their requirements.
Covered Product Categories
- Rotative equipment
- Boilers
- Pressure vessels
- Power piping
Services
- Incoming inspections
- Process inspections
- Pre-shipment inspections
- Compliance verifications
- Vendor QA audits
- Quality assurance programs
Location: Sección Grand Juriquilla, Querétaro, Cp. 76226, Mexico
Control Union Mexico
Control Union Mexico was founded in 2012 in the Mexican state of Chiapas and opened an office in Mexico City in 2014. The company has since expanded its services to cover the whole supply chain, regarding inspections, certifications, and guarantee management, mainly for commodities.
It participates in quality programs such as EN and ISO standards committees, as well as organizations such as the International Federation of Inspection Agencies (IFIA).
The company carries out diagnosis and audit activities, as well as quality control for the fruit supply chain and commodity inspections.
Covered Product Categories
- Grains
- Vegetable oils
- Fertilizers
- Fruits
- Sugar
- Coal
Services
- Quality inspections
- Quality determinations
- Verifications
- Pre-shipment inspections
- Warehouse inspections
Location: Avenida Santa Fe 495, Floor 10, Colonia Cruz Manca, Mexico
SCI Control & Inspeccion
SCI was founded in 1985 and focuses on regulatory and industrial inspection, quality control, and testing. It provides clients with what it claims to be a complete range of services by complying with regulatory and quality standards, international and local health, safety, and environmental requirements.
Its industrial inspection includes reviewing production procedures and inspection point plans, as well as the inspection of the assembly, manufacturing, and equipment maintenance.
SCI has received accreditations from ENAC and LQRA, as well as certificates related to integrated management systems such as NADCAP, MASE, and GPCN.
It currently employs over 400 experts and has performed over three million inspections.
Covered Product Categories
- Electrical equipment
- Pressure equipment
- Compressors
- Motors
- Pipes and fittings for manufacturing plants
Services
- Industrial inspections
- Equipment inspections
- Welding inspections
Location: C/ Estanislao Martínez Lara, No. 144 Parque Industrial Millimex, Santa Catarina – Nuevo León, Mexico
Mars Quality
Mars Quality is a global company that provides third-party quality control and inspection services in Mexico. The company’s specialist inspectors and auditors’ capabilities include supervision of product quality, determination of a supplier’s manufacturing capacities and trustworthiness, and confirmation of whether a factory complies with quality protocols and industry norms.
It examines products throughout the production cycle and helps to ensure products meet required standards. The company also examines the manufacturing process to identify potential areas for improvement.
Covered Product Categories
- Furniture
- Jewellery
- Cosmetics
- Electronics
- Garments
- Lighting
- Medical devices
- Automotive parts
- Packaging
- Food
Services
- First article inspections
- During production inspections
- Pre-shipment inspections
- Supplier verification audits
- ISO 9001 audits
- ISO 14001 audits
- ISO 22000 audits
- SA8000 audits
- Social and ethical compliance
Location: Not provided
OCA Global
OCA Global is a business group focused on providing inspection, quality control, certification, and consulting services. Its services are designed to aid clients in increasing the efficiency of their products, and processes. The group also helps clients to control quality, reduce risks, and comply with applicable regulations and legal requirements.
OCA Global was founded in 2010 and has since offered inspection, health, and safety services to over 240,000 clients. It operates in Mexico and numerous other locations. It also has 8 global divisions, among them Quality Control and Technical Assistance, Statutory Inspection, Marine and Commodities Inspection, and Technical Vehicle Inspection.
Covered Product Categories
- Food
- Petroleum products
- Dangerous goods
- Storage tanks
Services
- Supplier evaluations
- Customer experience assessments
- Commercial labeling inspections
- Non-destructive testing
Location: Altamira, Tampico, Carretera Tampico-Mante No. 2201, Col. Del Bosque, 89318, Mexico
